Lynx Firmware History

IMPORTANT - Installing new software on your Lynx may reset your unit's memory. For this reason, prior to starting the install, you should make sure:

  1. You have downloaded any dive logs
  2. You have your free Lynx Unlock PIN Code available

Lynx Firmware v1.21 (04-November-2014)

Please note: Dive Logger 3.02 is required for downloading any dives with firmware 1.17 or higher.

Improvements:

  • Minor bug fix.

Lynx Firmware v1.20 (03-July-2014)

Please note: Dive Logger 3.02 is required for downloading any dives with firmware 1.17 or higher.

Improvements:

  • Minor bug fix.
  • New OTU calculation method.
  • Changed ultrasonic sound threshold.

Lynx Firmware v1.18 (15-April-2014)

Please note: Dive Logger 3.02 is required for downloading any dives with firmware 1.17 or higher.

Improvements:

  • Minor bug fix.

Lynx Firmware v1.17 (17-March-2014)

Please note: Dive Logger 3.02 is required for downloading any dives with firmware 1.17 or higher.

Improvements:

  • Fixed issue with PIN locked-up after battery replacement.

Lynx Firmware v1.16 (04-March-2014)

Warning: Record all PINs and user settings before updating to this firmware. PINs and user settings will reset to factory default after installing this firmware. Dive logs will not be affected.

Improvements:

  • Added support for Location Transmitter.
  • Added max depth display. Dive screen display flip between Air Time, Max Depth, Air Time, and TTS.
  • Added temperature calibration
  • Low power mode is now available in any AI mode (Low power mode is activated if only one Tank transmitter is configured in the transmitter list.)
  • Added new battery types for the transmitter setup screen (ER17335M, ER26300M, IMR18350, IMR26500, ICR16340, LPF123A).
  • Added warning if the tank pressure does not change (decrease less 25 PSI in one minute)
  • Changed location transmitter NoSig timeout to 3 minutes. Tank transmitter NoSig is set to 1 minute.
  • Buddy tank can be set as Location Transmitter with the default name automatically change to BOAT.
  • Student tank can be set as Location Transmitter with the default name automatically change to BOAT.

Lynx Firmware v1.14 (12-Feb-2014)

Improvements:

  • Fixed the ultrasonic firmware version not showing on the status screen.

Lynx Firmware v1.13 (20-Sep-2013)

Improvements:

  • Fixed bug which caused unit to get stuck in a loop between the "Waking Up" screen and "Battery Check" screen when battery was under 30% capacity.

Lynx Firmware v1.12

New Features:

  • The "set all units" option has been removed from the Air Integration menu, to prevent accidental information loss.

Lynx Firmware v1.11

New Features:

  • IMPORTANT: Lynx Firmware v1.11 significantly reduces the extent to which your Lynx will drain the battery when turned off. With v1.10, the Lynx is capable of draining a battery in about a week and a half, if the unit sits unused with a battery inside. This standby drain is significantly reduced with v1.11.

Lynx Firmware v1.10

New Features:

  • CRITICAL UPDATE: T1 Transmitters S/N 385 and above now transmit in 2 PSI increments. If your Lynx is running V1.07 or earlier it will not be compatible with Transmitters S/N 385+, and will show half of the actual pressure.

    For your Lynx to be compatible with all T1 Transmitters you need to update to V1.10

Lynx Firmware v1.07

New Features:

  • New "Ready to Dive" screen with bigger font, brighter colour, no-fly countdown, tank icon and tank pressure.
  • Added "YOU" tank gas usage reporting in dive log detail (for GAUGE & REC mode only).
  • Fixed N2 deco bug.
  • Reset tank status data when exiting the surface Transmitter setting menu.
  • Fixed the bug which caused the unit to lose the PIN upon removing the battery.
  • Fixed the "tap wake up" bug for improved performance in cold waters.
  • Changed "Not Ready to Dive" screen colour to light blue.
  • Fixed graphical bug which prevented user from seeing Buddy air when Velocity was turned on (i.e. ascent and descent rates). They will now alternate every 4 seconds.

    Removed Lynx graphical velocity display, only standard numerical velocity is displayed.
  • Removed analog clock.
  • Added additional data to dive log so that Solo/Buddy/Students tank serial number can be identified by the dive logger.
  • Fixed bug which prevented side tap from the Group 4 & 9 screen being able to access the Locator Feature without needing the Locator PIN.

Lynx Firmware v1.04

Release Software